A Call for Permeable Paving

with permeable paving, stormwater doesn't all become surface runoff
With permeable paving, all stormwater doesn’t become surface runoff
Image Source: Flickr

I’ve said it before and I’ll say it again: urban dwellers have an obsession with paving every possible open space.

Housing society compound?
Pave it — we need to park our cars!

Open area where social interactions take place?
Pave it — our clothes get muddy!

Barely-used internal road?
Pave it — we get stuck in the monsoon and it’s hell on the tyres!

If we Must Pave, Let it be Permeable

Some of this paving may well be justified but, because it is done indiscriminately, it leads to a boatload of problems related to the water table, the health of the city’s trees and even the heat we’re subjected to. I’ve written all this in greater detail elsewhere on this site but this particular post is about a type of product that could help in such situations.

In late 2015, there was a buzz in the construction world as Lafarge UK showcased a super-porous asphalt that could guzzle an incredible 4000 litres of water in about a minute. Media started calling it “thirsty concrete” and truly, if you watch the video below, it does look like the water is vanishing into desert sands.

Permeable Concrete Video

I have never been a great fan of the wasteful use of concrete but, when it is required, the least we can do as architects is to try and use it correctly.  Unfortunately, at least as far as I can tell, this product and others like it are not readily available in India. In fact the only case I know of permeable concrete being used, is for a parking lot at Jaipur railway station.

Unless architects and engineers specify such products and create a market for them, there is no way that companies will manufacture them here. I do hope some of my brethren in the industry take up the call.

Reduce Hard Paving

In our urban environment we see numerous examples of open spaces with hard paving all over them. One of the reasons for this is our insatiable hunger for parking. The earth in our cities is starved of air and water — sacrificed at the altar of our rubber-shod tin cans.

“Ah”, but I hear you say, “we really do need that parking space!”.

Of course, if our city fathers were more enlightened and aimed for better public transportation instead of caving in to the cult of the car, we wouldn’t have reached this impasse in the first place. However, this page is not a rant about ineffective urban planning but about the effects of indiscriminate paving and what we can do about it.

When we pave over open spaces, a number of things happen.

The Water Table Drops Dramatically

This one is pretty obvious and hardly needs an explanation. If the ground is paved, there is no way that any more than a tiny fraction of rainwater will ever reach the soil. In Bombay, there was a time when one could dig a well and hit water not far below the surface. These days, the only reliable wells are the ones that adjoin large green spaces — like the maidans for example.

Other cities are not so lucky and those who live where borewells are common will tell you that the wells need to be dug deeper every year. The water they reach is also an increasingly fickle seam. The demand on the groundwater is constantly on the rise but all that paving never allows it to get recharged.

Egress of Saline Water in Coastal Areas

too much paving leads to a drop in the water table which allows egress of saltwater

Freshwater is lighter than saline water

Saltwater is denser than freshwater and forces its way inland below the latter. If the (fresh) water table drops, the boundary between them is pushed deeper inland. Salinity in the soil is not merely bad for plant life but also for construction.

Trees Find it Difficult to Survive

For plants — and especially trees — paving is doubly detrimental. Not only is there very little water in the soil to help them grow but their roots are also unable to breathe. As a result, the trees develop a weak rooting system; it is no wonder so many of them topple over during the monsoons. That many of the avenue trees in our cities are fast-growing exotics, doesn’t help very much either.

Drainage Systems are Overwhelmed

Kalyan Station under water July 2005

Kalyan Station under water
Image source: Wikipedia

When it rains in an urban area that is excessively paved, the runoff has to go somewhere! That somewhere, is the storm-water system which is frequently unable to cope. This leads to the all-too-familiar floods we see every year.

At best, flooding is an inconvenience but, as the last few years have shown us, it can also be deadly. Corrupt builders, politicians, and bureaucrats are responsible for the rampant encroachment on natural drainage channels in many of our cities. This results in the kind of devastation and loss of life we saw in Bombay (2005), and Madras (2015).

No doubt, in both cases there had been uncommonly heavy rainfall. We must remember, however, that climate change is causing an increased frequency of such extreme events, so it would be foolish to brush them aside as a freak events.

Worsening of the Urban Heat Island Effect

urban heat island

Temperatures are significantly higher in cities
Image source: Wikipedia

Paving is one of the major factors leading to the heat island effect — that phenomenon where an urban area is significantly hotter than its surroundings.

Unlike soil which cools off rapidly when the sun goes down, paving retains heat for longer and then emits it slowly through the night. One of the only ways to reduce this effect is to increase the area under plantation (including on roof terraces). However, as we have seen earlier, that is rather hard to do, when everything has been paved over. It’s a bit of a vicious cycle.

What We Need to do

Of course the very best thing to do is to avoid paving as far as possible. However, there are many situations when we really have no choice. At such times, the least we can do is to use materials and systems to mitigate the problems we cause.

Pervious Concrete Paving

permeable concrete

Permeable Concrete
Image Soure: Wikipedia

This is a type of concrete where the fine aggregate (sand) is missing so that the concrete becomes porous enough for water to percolate through. This means, of course, that it is not as solid as other concretes and cannot sustain the same heavy-duty usage. On the other hand, it is perfectly usable in areas where traffic density is low or, for example, in parking lots.

Some cities like Portland, Oregon in the USA have experimented quite extensively with permeable paving. Unfortunately, there is little sign of anything even remotely close being done here.

Perforated Paving Block or Grass Paver

grass paver blocks

Grass Pavers
Image Soure: Wikipedia

These are easily available here but not as commonly used as I wish they were. They are easy to lay and, to my eye, they make a space look much nicer than if were completely covered with a hard surface.

Permeability is excellent but, like porous concrete, it can only be used for low-traffic areas or parking lots.

Tree Guards

tree guard

Tree Guards
Image Soure: Flickr

If all else fails — and even if not, it is wise to have tree guards which allow the soil around the roots to breathe. This is something that is conspicuously lacking in our cities.Instead, we see a low brick wall made as close to the trunk as possible. Apart from being undersized and ugly, these are also tripping hazards for pedestrians.

It would be so simple, instead, to embed a cast iron tree guard that is level with the pavement. If the city authorities feel that the iron will be pilfered, they can do something similar in ferro-crete. It won’t look half as nice but at least it will be effective.

Green Roofs

green roof

Green Roof
Image Source: Wikipedia

While a green roof can’t do very much for the surface runoff and the storm-water systems, it can certainly be help reduce the urban heat island effect.

Planted roofs haven’t caught on too well here as yet. That will not change until waterproofing systems become much more reliable. People who have running battles with monsoon leakage are unlikely to tempt fate.

Conclusion

The situation is far from ideal but it isn’t a lost cause just yet. Given enough awareness and pressure from the general public, things can improve. Organisations like depave, for example, have done this very effectively. They have not only raised awareness in Portland but have even forced the local government to reverse past mistakes.

Maybe it’s time to start something like that in all our cities here as well.

Pro Bono Pledge

pro bonoIt’s almost a quarter century since I became a practising architect and, although I have been doing pro bono design work over the years, it has always been for people or organizations that know me directly. This way I do no more than a couple of days worth of pro bono work in the entire year.

Starting this April, I have decided to put aside one hundred hours every year for pro bono work. It could be any non-profit although priority will be given to assignments that are connected in some way to the environment or to education.

In the USA, there is an organization called 1+ which asks design houses to donate 1% of their time to non-profit work. That works out to about 20 hours per person each year. They then put people in need designing done in touch with those who do it.

Unfortunately this organization has no chapters in India so it looks like I’m on my own here and will have to rely on my friends, and the readers of this website to get the message out.

Ground Rules

There are a few things to remember and it is best to put them down so there is no confusion later.

  • The project and the organization undertaking it must genuinely be not-for-profit.
  • It must be for a good cause.
  • No single assignment will be allotted more than 40 hours.
  • If any travel is involved, it has to be paid for.
  • If any fancy presentations have to be made I will only provide the raw design. You do the rest.
  • If you want detailed estimates of cost, please get in touch with a builder / contractor. At best, I will be able to give you rule-of-thumb costings.
  • I will try and do the required work as quickly as possible but please understand that my paying clients have priority on my time.
  • Ultimately, the decision on whether to take up an assignment or not, rests with me.

Please share this page with people you think might be interested. If you do, someone, somewhere will be able to use the information. If it just sits here, nobody benefits.

Indian Green Building Ratings

Magic Tricks & Green Ratings

Green Ratings and the Art of Illusion

I’ve been critical of Indian green building ratings, their basic limitations and the fact that they can and will be manipulated. Of course this is not restricted to India alone… the problem is worldwide.

Now, a study by the New Delhi-based research organisation, Centre for Science and Environment, CSE, shows that a number of buildings that had been awarded platinum status–the highest achievable rating of the Indian Green Building Council or IGBC–were in fact barely worthy of any rating at all based on the amount of energy and water they consumed. Interestingly, the study was based on building performance data on IGBC’s website itself. A defensive IGBC is now nit-picking about CSE’s method of analysis but whichever way you look at it, the fact remains that the ratings methodology looks severely flawed.

How is it possible for the difference between the theoretical consumption–on the basis of which the rating is given–and the actual consumption, to be so vast? To my mind, it strikes at the very root of the problem when the system rewards you for your stated intent (genuine or otherwise) instead of rewarding you for your actions. It is all very well to brag that your building has a fantastic green rating but this has to be borne out by actual performance.

The worrying aspect is, the gulf between ratings and reality has ramifications far beyond mere bragging rights.

Many state governments give tax-breaks and extra floor-space for green buildings so the incentive to obtain a certification can be huge.  It is, unfortunately, all too easy to claim one thing at the time of rating and then shift the goal-posts at a later date.

Now that this latest can of worms has been opened, let us hope for a positive change in the way ratings are given and retained. With so many big names and businesses involved, however, there is always a chance that they will collectively try to sweep it under the carpet; and use the old system of discrediting the whistle-blower.

Acknowledgement: image from Pixbay

New BEE Ratings for Air Conditioning

From the beginning of 2104—and in line with past practice—the Bureau of Energy Efficiency (BEE) has updated their rating system for all appliances including lights, fans and air-conditioners. I’m only going to talk about air conditioners here because they are, by far, the biggest guzzlers of electricity.

Energy efficiency is calculated as a ratio of output Watts v/s input Watts. So, if a 3,500W (1 Tonne) air conditioner needs 1,200W to run, then the EER is 2.92.  Up to the end of 2011, that would have made it a 4-star machine. In 2012 and 2013, it would have been considered a 3-star machine. Today, that same machine will be considered a 2-starrer. So yes, as technology improves, the ratings are revised and made a little more stringent—which is how it should be. Have a look at the table below to get an idea of the changes.

BEE Rating History

BEE Ratings over the last few years

While this is good, it may not be good enough.  As this article shows, the entry level for a single star is on par with many other countries but the higher ratings are somewhat below world averages.  Also, manufacturers of inverter air conditioners have long been saying that their machines cannot be rated because they are “better than 5-star”.  Checking the specifications for the ones available in India shows that many of them have an average EER greater than 3.5 but none cross 4.0 even for minimum cooling–whereas the same companies manufacture models for other countries with a higher EER.

This could be because of two factors:

  1. There is not enough incentive to go beyond the maximum available rating since the average person (and even most architects) won’t easily be able to compare two models for energy efficiency.
  2. Models with a a higher EER are more expensive to manufacture and the Indian market is notoriously price-sensitive.

While there’s not much anyone can do about the second factor, the first can certainly be tackled by raising the bar for ratings. As more and more people resort to artificially cooling their indoor environment instead of availing passive cooling (thanks to current architectural trends) our energy situation is getting more and more precarious.

I must be an idiot

crackpot environmentalist architect

The Crackpot Environmentalist Architect

Just received a call from a gentleman who wanted to develop 9 acres of land at Nasrapur village in Karjat, very close to some of the bungalows I’ve done and am doing there. That sounded interesting, naturally.

Unfortunately he wanted to make houses entirely and exclusively out of prefab steel. Never mind that they would not be environmentally sustainable and, therefore, contrary of the kind of work I do; never mind, even, that they might look like factory sheds! Someone had obviously convinced him that this was the way to go.

I said that I could not take up a project if I felt it was ecologically damaging and urged him to at least consider other options. He was closed to such crackpot ideas but very understanding about my foolishness. His words were, “Yes, of course, everyone has their… their own…” and then his voice trailed off.

Sometimes, it’s better to lose a project before you even have it in hand.

Glaring mistakes

conventional v/s curtain wall

In hot climates, the overall energy usage rises as you increase the glazed area. Curtain walls, therefore, are highly inappropriate.

I have ranted about glass façades for a long time and this editorial by Sunita Narain of DTE has inspired me to add a couple of paragraphs to the original one.  Among other things, she has written about a recent study by IIT-Delhi which found that, in our hot climate, the manufacturers’ claims of special coated glass or double/triple glazing being able to reduce heat gain are rather hollow.

One of the other specious arguments put forth in an attempt to portray glass curtain walls as green systems is to say that it reduces the electricity consumed for lighting. This is a half-truth. Leave aside the uncomfortable glare that people working inside such buildings have to put up with, let us make a simple comparison.

Consider a 10m² conventionally designed space. Assuming that we don’t take passive cooling techniques into account, the air-conditioning load will be in the region of 3,500W (1 ton).  Lighting the same space, on the other hand, will need just 50W with fluorescents or 40W if we’re using LED fittings.

Now, imagine a similar sized curtain-walled space. The maximum saving that can be achieved by reducing lighting is a puny 50W. However–and this is the big problem–air-conditioning requirements will probably have risen to a whopping 5,000W.  Even with all the specially coated and multi-layered of glass in the world, the total requirement is unlikely to be anything less than 4,500W.

So yes, we may not use as much electricity for lighting but, I’m afraid, the energy usage for cooling will go right through the roof and no amount of marketing spin can get around this simple fact.

Beach Cleanup up after Ganpati

It’s the day after the popular Ganesh festival here in Bombay and, as every year, I headed to the beach to clean up the mess the revellers left behind. Being an old hand at this, I was put in charge of the volunteers who came from various colleges in the area. As usual, it was a depressing sight when they arrived in the early morning. By the time we were through though, there was some semblance of cleanliness. The municipal workers were there too and some of them did give us strange looks…

Anyone not familiar with the festival can read this article. Some time late last month on an Yahoo Group called Indian Environment, someone had written defending this method of celebrating the festival. My response to his original mail follows:

If you want to read the entire thread you’ll have to be a member of the IndianEnvironment group.

Dear Professor,

As someone who has been involved with cleaning up after the revellers for the last several years, let me reiterate:

  1. Most of the idols are made of Plaster of Paris. PoP does not float back to our already dirty and polluted shores but becomes a mucky layer that chokes the sea-bed.
  2. Pieces of thermocole and styrofoam do settle on beaches – sometimes many miles away. Are volunteers able or willing to monitor our entire Konkan coast? I don’t think we have either the time or the resources for that.
  3. Most important, these idols are coated with paints containing toxic heavy metals even though less harmful alternatives exist. There is no need to tell you what damage these colours cause.

Yes, we do have a huge country and people do need entertainment to liven up their otherwise dreary lives; yes, it does happen only once a year (thank goodness!) and yes, these things will not change overnight.

But that doesn’t make it right or desirable. We do need to make people aware – and as a professor you are in a better position to do so than most of us. It is nobody’s case that the festival be scrapped; but it can be carried out in a way that is as holistic as it is holy.

Naturally it will be a long and uphill battle. But it is a battle that can – nay, it must – be won.

Simply accepting it is no longer an option.